What are the suction pump operation procedures?
Feb 22, 2019
Sucks are often used for orotracheal suction or endotracheal intubation in patients with tracheal suction to remove secretions, blood, vomit and other substances that cause airway obstruction, so that the respiratory tract remains clear. Proper use of the suction device can bring you health.
The operation procedure of the suction device is: 1. Turn on the suction device, the power indicator light is green; 2. Open the negative pressure switch and fold the latex tube at the same time; 3. Observe the square negative pressure gauge and adjust the negative pressure regulation at the same time. Knob, adjust to the appropriate negative pressure; 4. Hold the end of the suction hole of the suction tube and block the vent hole; 5. Another hand suction tube extends the end of the suction tube into the patient's air tube, you can start Sucking; 6. After the sputum is sucked out into the liquid storage bottle, the end of the suction tube is taken out from the patient body, and the suction is completed.
Pay attention to the following problems when using the suction device: 1. Monitor the performance of the suction device and the pipeline, check whether the power supply voltage and the suction pump voltage are consistent, and whether the connection between the intake pipe and the air outlet pipe is correct; 2. Skillful operation, strict and sterile, To prevent cross-infection, the use of sucking should be light and stable, and the negative pressure should not be too large when attracting, so as not to damage the tracheal mucosa.
